Posts

Showing posts from November, 2024

Furnace tried to start then it blows cold only.

Image
  Furnace repair in Mcdonough The sensors in this furnace turned it off and turned the blower to purge. This requires a technician. It is no easy fix. The roll out here tripped. This is not a bad switch. It saved the furnace. The flame was not going into the exchanger but was still touching the flame sensor. This is bad. The technician (me) cleared the tube. Cleaned the sensor and cleaned pressure switch. After this a reset on the roll out was done. This furnace in McDonough Ga. Here you see bottom flame not going in but touching sensor. Here you see a clean burner with flame going into the exchanger, is working again.  Aaac Service heating and air open Sunday. 

The thermostat is calling for heat but there is no heat resolved.

Image
The furnace in McDonough wouldn't start even though the thermostat was on. Despite the power being checked and the breaker being set to on, there was no power reaching the unit. The issue turned out to be a faulty switch near the furnace. Aaac Service managed to repair this residential gas furnace and get it running again on a Saturday. Issues we can fix fast The furnace tries to come on but it won't light The furnace flames come on but the blower doesn't The blower runs constantly but no heat The flames come on but go right out The thermostat clicks on but the furnace never starts The thermostat clicks on but the air conditioner won't start The fan comes on but its not cooling The fan on a/c isn't spinning The air conditioner is buzzing and won't come on The a/c makes a loud noise but doesn't start The ac has a humming but not coming on The air conditioner is running but not cooling  

The flames came out the front of my furnace

Image
  Furnace repair in Mcdonough Turn it off call for service. This is too dangerous to mess with. Aaac Service Heating and air conditioning 11 mins ago The draft motor of the residential gas furnace has malfunctioned. This motor is responsible for expelling carbon monoxide from the house through the flue. Should it fail, the system is designed to shut down automatically. It is crucial not to operate it in this condition. Contact a local repair technician immediately. Aaac Service Heating and Air, located in Locust Grove, is available to assist you today. Learn more Issues we can fix fast The furnace tries to come on but it won't light The furnace flames come on but the blower doesn't The blower runs constantly but no heat The flames come on but go right out The thermostat clicks on but the furnace never starts The thermostat clicks on but the air conditioner won't start The fan comes on but its not cooling The fan on a/c isn't spinning The air conditioner is buzzing and w...

Furnace Starts then goes off right away solved

Image
 Furnace Repair The old furnace was leaking gas into the home, yet the flame sensor immediately shut it down. Aaac Service Heating and Air in Locust Grove was able to fix it the same day we called. Considering the furnace is 24 years old, we suggest replacing it soon. For now, they have heating. It wasn't a faulty sensor; rather, the sensor functioned as intended. Gas was leaking into the furnace without igniting, creating a hazardous condition. We disassembled the burners, cleaned the heat exchanger, and opened the gas orifices. This gives them time to gather funds for a replacement.